Navapada Sales

Used in plaster work and it's very important product to get the best result.At the global level, it is recommended that fiberglass mesh used should be above 145gsm density for excellent waterproofing. Our quality is superior. We are in giving the quality oriented product to our consumer.

NAVPAD SALES  fiber mesh Roll is non adhesive coated and ideal for minimizing the risk of cracks between column and bricks wall joint ,this mesh roll is used before plaster on the wall . which give protection to the wall and the joint and minimizes the risk of crack on the wall and give strength to the wall . very easy to use & replaces the traditional iron mesh which was used for this purpose. Fiberglass mesh is woven by fiberglass yarn and then coated by alkaline resistant latex. It has alkaline resistance, high strength, etc. It is an ideal engineering material in construction. It is mainly used to reinforce cement, stone, wall materials, roofing and so on. Plastering fiber glass mesh is used for reinforcement surfaces during plastering, installation leveling floors, waterproofing, restoration of cracked plaster in order to prevent cracking or fraying of the plaster. Fiberglass mesh is cheap material that does not burn and is characterized by both low weight and high strength. These properties allow it to be successfully used in the formation of plaster facades, as well as use on internal wall and ceiling surfaces. This material is widely used for fastening the surface layer at the corners of the room. Most widely used standard fiberglass plaster mesh is the density of 145 GSM for interior and exterior cladding and façade work.